Q2. What is the color temperature of PD36R Pro?
Around 6500K.
Q3. What is the working voltage of PD36R Pro?
Voltage: 3.0 - 4.2V.
Q4. What is the runtime of the Turbo mode of PD36R Pro?
The runtime of the Turbo mode is 3 hours and 30 minutes. The light will rapidly accumulate a lot of heat when used on 2800 lumens / Turbo mode. When the light reaches a temperature of a certain level, the light will automatically step down a few lumens to reduce the temperature. So the runtime of Turbo mode is measured in a total of runtime including output at reduced levels due to temperature or protection mechanism in the design. The stated data are from the results produced by Fenix through its laboratory testing under the temperature of 21±3°C according to the ANSI/PLATO FL1 standard. (For specific runtime performance, refer to the runtime graph in the manual)
Q5. Why is the runtime difference between Turbo mode and High mode only 25 minutes?
Because the PD36R Pro is extremely compact, its heat dissipation area is limited. When the light reaches a temperature of a certain level, the light will automatically step down a few lumens to reduce the temperature due to the limitation of heat dissipation capacity, resulting in the accumulated runtime of the Turbo mode not much different from the runtime of the High mode. (For specific runtime performance, refer to the runtime graph in the manual)
Q4. Is PD36R Pro rechargeable?
Yes, PD36R Pro is rechargeable with a USB Type-C. The charging time is about 3 hours. (The indicator will display red while charging and will turn green when fully charged.)
Q5. How to prevent accidentally activate the PD36R Pro?
Unscrew the light tail, or remove the battery to prevent accidental activation.
Q6. Why does the PD36R Pro downshift to a lower mode after being used for a while and the higher mode cannot be selected?
There are two reasons:
1. Intelligent Overheat Protection
The light will accumulate a lot of heat when used on Turbo output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of Turbo mode.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output mode, the light blinks 3 times every 5 minutes to remind you to timely recharge or replace the battery.
Q7. Why does the PD36R Pro happen to flicker?
The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Q8. What kind of battery can be used in PD36R Pro?
It is recommended to use 1 x Fenix ARB-L21-5000 V2.0 Li-ion battery. And compatible with Fenix ARB-L21-5000U and Fenix ARB-L21-4000P.
Q9. What are the optional accessories for PD36R Pro?
They are listed below:
AER-05 Remote pressure switch
ALG-16 Tactical light M-Lok rail clamp
ALG-00 Rail mount
ALG-18 rail mount
AOD-S V2.0 Diffuser Tip
Q10. What should I do when the PD36R Pro needs repair?
1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 5-year free repair: Fenix will repair a light free of charge within 5 years (non-detachable light: 2 years, rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.
For more detailed information, please check in the "Support" section.
