Q1. What kind of LED is used in GL22? Does Fenix offer to replace LED?
Luminus SST20 LED with a lifespan of 50,000 hours.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
Q2. What is the color temperature of GL22?
Around 6000K.
Q3. What is the working voltage of GL22?
Voltage: 4.2V.
Q4. Is GL22 rechargeable?
The included ARB-L16-700UP Li-ion battery can be directly charged with a micro USB port. The indicator will display red while charging and will turn blue when fully charged. The normal charging time of the included Fenix ARB-L16-700UP is approximately 2 hours from depletion to full charging.
Q5. How to prevent accidentally activate the GL22?
Lock: with the light switched off, simultaneously press and hold both switches for 5 seconds to lock the light, the light will blink twice on white light to indicate locked status.
Unlock: with the light locked, simultaneously press and hold both switches for 1 second, the light will be unlocked and activated on the previously used output.
*In locked status, clicking or pressing either of the switches will activate 2 one-second blinks on white light to indicate locked status.
Q6. Why does the GL22 downshift to a lower mode after being used for a while and the higher mode cannot be selected?
There are two reasons:
1. Intelligent Overheat Protection
The light will accumulate a lot of heat when used on higher output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of higher modes.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until to 50 lumens. When this happens in 50 lumens, the light blinks 3 times every 5 minutes to remind you to recharge or replace the battery.
Q7. Why does the GL22 happen to flicker?
The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Q8. What kind of battery can be used in GL22?
It is recommended to use Fenix ARB-L16-700UP or Fenix ARB-L16-700P battery. And compatible with CR123A Lithium battery.
Other Li-ion batteries are not recommended. As Higher modes fail to light up due to current and voltage limitation, an unmatched battery may cause the light to fail to work normally.
Q9. What are the optional accessories for GL22?
None.
Q10. What should I do when the GL22 needs repair?
1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 5-year free repair: Fenix will repair a light free of charge within 5 years (non-detachable light: 2 years, rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.
Q11. What type of pistols does GL22 fit?
1. Fits most full-size pistols with a Glock or MIL-STD-1913 (Picatinny) rail.
2. Fits a few compact pistols including the Glock36 with standard rail and Springfield XDs.
3. Does not fit any compact models from Sig Sauer, Taurus F&N, CZ, and Smith & Wesson with short rails or without standard rails.
4. Does not fit any sub-compact or micro-compact pistols.
For more detailed information, please check in the "Support" section.
