Q1. What is the product positioning of E06R? What are the key features of E06R?
Fenix E06R is a 3-in-1 keychain flashlight. Its key features include:
1. White light, UV light, and red laser.
2. Red/blue/RGB breathing light ring.
3. Keychain hole and belt clip support multiple carrying ways.
Q2. What kind of LEDs are used in E06R? Does Fenix offer to replace LED?
The main light utilizes two Luminus SST12 LEDs, with a lifespan of 50,000 hours each. The UV light utilizes one Luminus SST-08-UV LED.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
Q3. What is the color temperature of E06R?
Around 6500K.
Q4. What is the operating voltage and operating current of E06R?
The operating voltage is 3 V - 4.2 V. The operating current is 2 A.
Q5. Is E06R rechargeable? How long is the charging time?
Yes. The E06R is rechargeable via the USB Type-C charging port. The indicator will display red while charging and will turn green when fully charged. The normal charging time of the built-in battery is about 2 hours from depleted to fully charged.
Q6. Why does the E06R downshift to a lower mode after being used for a while and the higher mode cannot be selected?
There are two reasons:
1. Intelligent Overheat Protection
The light will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 65°C/149°F or above, it will automatically step down a few lumens to reduce the temperature. When the temperature drops below 65°C/149°F, the light will gradually recall the preset output level.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached.
Q7. Why does the E06R happen to flicker?
The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Q8. What kind of battery can be used in E06R?
The E06R utilizes a built-in 750mAh battery that is not replaceable.
Q9. What are the optional accessories for E06R?
The included key chain ring and lanyard.
Q10. What should I do when the E06R needs repair?
1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 2-year free repair: Fenix will repair a light free of charge within 2 years of purchase if problems develop with normal use.
3. Lifetime limited warranty: If repair is required after 2 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.
For more detailed information, please check:
http://www.fenixlight.com http://www.fenixlight.com.cn
Q11.Why does the E06R develop secondary light spots around the red laser beam after being used for a while?
A: This is a normal optical phenomenon caused by the laser passing through multiple lens layers, which does not affect usage safety or core functions at all. The specific mechanisms are as follows:
- Lens reflection effect: when the laser passes through the flashlight's dual-lens system (laser module lens + light head lens), a minimal portion of the light reflects, creating secondary light spots. These spots are significantly dimmer than the main light and become nearly invisible to the naked eye beyond 3 meters. This is a common phenomenon in all multi-lens optical devices and does not indicate a product defect.
2. Thermal deformation effect: after continuous use of the E06R, its internal temperature rises, causing micron-level thermal expansion in polymer lenses. This deformation temporarily alters the light path's refraction, making the secondary light spots shift positions or change intensity (dimming/brightening). This phenomenon usually disappears when the temperature returns to normal.
This phenomenon does not affect the core functions of laser indication, and it remains fully compliant with Class 1 Laser Safety Standards (power < 0.39mW).
The E06R's red laser is designed for daily portable guidance (e.g., PPT presentations, human-pet interaction), not for high-precision engineering applications (e.g., precise positioning, range finding). For precise positioning in extreme temperature environments (e.g., Arctic expeditions, high-temperature workshops), we recommend using professional-grade laser instruments.
