Q1. What is the product positioning of BC30 V2.0? And who are the target customers?

A: The Fenix BC30 V2.0 is a professional bicycle light that specifically designed for mountain cycling. Delivering a max output of 2200 lumens, the light offers a wide illumination range, therefore the road condition ahead is super clear. Plus the newly fitted wireless control switch, the light performs very well in remote operation of instant burst and output selection. Additionally, all-metal housing for better heat dissipation, bicycle mount for more stable fixation, battery can be replaceable; this BC30 V2.0 is the ideal lighting choice for your mountain cycling.

Q2. What are the key features and benefits of BC30 V2.0?

A: 1) 2200 lumens maximum output

  2) Dual Distance Beam System.

  3) Powered by 2*18650 rechargeable Li-ion batteries, batteries can be replaced.

  4) Smart wireless control switch.

  5) Quick-release bicycle mount, easy to assemble and disassemble.

  6) Compatible with Fenix bicycle light helmet holder, can be used on a helmet.

Q3. What kind of LED is used in BC30 V2.0?

A: Two LUMINUS SST-40-N5 LEDs with a lifespan of 50,000 hours.

Q4. Does BC30 V2.0 have overheat protection?

A: Yes. The light will accumulate a lot of heat when working on High mode for extended periods. When the light reaches a temperature of 65°C, the light will automatically step down a few lumens to reduce the temperature. High mode can be reselected if needed.

Q5. What kinds of batteries can be used in BC30 V2.0 ?

A: The light is powered by two 18650 rechargeable Li-ion batteries and compatible with 4 CR123A batteries. While the Wireless switch uses a CR1632 button battery.

Q6. How to connect wireless switch with BC30 V2.0？

A：First Connection

Press and hold the functional switch for 5 seconds, and the switch will flash red and green alternately, then single click any switch of the wireless switch, the bicycle light will light up to indicate connection is completed.

Note: 1. After the first connection, the wireless remote switch automatically memorizes the paired status. There is no need to match again afterwards.

2. The linear distance between the light and the wireless switch should not exceed 1.5 meters during the pairing process.

Q7：What are the differences between BC30 V2.0 and BC30?

A: See the parameters below: