GL23R

Product Features

1200 lumens maximum output, 240 meters maximum beam distance.
Uses a Luminus SFT40 LED with a lifespan of 50,000 hours.
Digitally regulated circuit for maintaining a stable output.
Reverse polarity protection, to protect from improper battery insertion.
Design for guns with tactical rails.
Ambidextrous switching with dual tactical tail switch.
Dual tail switch can be replaced according to user's preferences.
Precise green laser sight.
Made of durable A6061-T6 aluminum alloy material.
Premium type HAIII hard-anodized anti-abrasive finish.
Toughened ultra-clear glass lens with an anti-reflective coating.

FREQUENTLY Q&A

FAQs About Fenix GL23R Tactical Light

Q1. What kind of LED is used in GL23R? Does Fenix offer to replace LED?
A: Luminus SFT40 LED with a lifespan of 50,000 hours.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.

Q2. What is the color temperature of GL23R?
A: Around 6500K.

Q3. What is the working voltage of GL23R?
A: 3.0V - 4.2V.

Q4. Is GL23R rechargeable?
A: The included Fenix ARB-L18-1100 rechargeable battery can be directly charged via the USB Type-C port on the tactical light. The indicator will display red while charging and will turn green when fully charged.

Q5. How to mount the GL23R?
Please make sure your firearm rail is Picatinny rail or Glock rail and choose the appropriate rail plate (Glock rail plate is installed by default), you can change the rail plate to make the tactical light more suitable for your firearm.
1. The GL23R is designed for precise aiming, it required a basic tool or simply a coin to be attached or detached from the side of the weapon or accessory rail.
2. Loosen the rail clamp bolt.
3. Placing the fixed portion of the rail clamp against the accessory rail and align the rail key with the appropriate cross groove in the accessory rail.
4. Tighten the rail clamp bolt and make sure it is securely attached to the firearm. Again a coin should be helpful to obtain sufficient tightness.

Q6. Why does the GL23R downshift to a lower mode after being used for a while and the higher mode cannot be selected?
The light will accumulate a lot of heat when used on higher output levels for extended periods. When the light reaches a temperature of 55°C/131°F or above, the light will automatically step down a few lumens to reduce the temperature.

Q7. Why does the GL23R happen to flicker?
A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or light is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.

Q8. What kind of battery can be used in GL23R?
A: It is recommended to use a Fenix ARB-L18-1100 rechargeable battery and compatible with 18350 battery.
Other Li-ion batteries are not recommended. As Higher modes fail to light up due to current and voltage limitation, an unmatched battery may cause the light to fail to work normally.

Q9. What type of pistols does GL23R fit?
1. Fits most full-size pistols with a Glock or MIL-STD-1913 (Picatinny) rail.
2.Fits a few compact pistols.
3. Does not fit any compact models from Sig Sauer, Taurus F&N, CZ, and Smith & Wesson with short rails or without standard rails.
4. Does not fit any sub-compact or micro-compact pistols.

Q10. How to zero the laser light?
1.The windage adjustment is at the left sign of the light. Use the included Allen wrench clockwise or counter-clockwise to move the laser point.
2.The elevation adjustment is located at the bottom of the light, use the included Allen wrench clockwise or counter-clockwise to move the laser point.
3. When making large adjustments they may be an interaction that causes the laser to move diagonally or bind. It may become necessary to rotate the opposing adjustment screw counterclockwise to allow the laser cartridge to move to the desired position.

Q11. What should I do when the GL23R needs repair?
A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 5-year free repair: Fenix will repair a light free of charge within 5 years (non-detachable light: 2 years, rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.

Size	3.43'' x 1.18'' x 1.69''/87 x 30 x 43 mm
Weight	4.23 oz/120 g (including battery)
Battery	Included a Fenix ARB-L18-1100 rechargeable battery

Flashlights

Headlamps

Bike Lights

Lanterns

Accessories

EVERYDAY CARRY

OUTDOOR

LAW ENFORCEMENT

INDUSTRIAL & SAFETY

SEARCH & RESCUE

HUNTING

Product Reviews

Activities

FENIX Ambassador

Learning

After-sales Support

Serial Number Inquiry

Download Center

Company Profile

Company Culture

Sales Network

Brand Honor

Contact Us

Flashlights

GL23R

LASER TACTICAL LIGHT

Product Features

TECHNICAL PARAMETER

FREQUENTLY Q&A

FAQs About Fenix GL23R Tactical Light

DOWNLOAD CENTER

Fenix_GL23R_Multilingual_User_Manual

PRODUCT REVIEWS

CUSTOMER REVIEWS