Flashlights

PD32R

HIGH-PERFORMANCE RECHARGEABLE TACTICAL FLASHLIGHT

The Fenix PD32R rechargeable flashlight is a compact tactical flashlight that can emit light up to a distance of 347 meters with a maximum brightness of 1400 lumens. The package comes with a 3400mAh rechargeable battery that can be charged through the hidden USB-Type C charging port of the flashlight. Alternatively, the flashlight can be powered by two cold-resistant CR123A batteries, making it ideal for outdoor and high-altitude lighting uses. The flashlight is extremely convenient for law enforcement with its multi-function mute tail switch that controls the on/off function, Strobe mode, and four brightness levels. Compact and tough-built with an IP68 dustproof and waterproof rating, this sturdy flashlight is perfect for outdoor and tactical purposes.
Size
5.32'' x 1.04'' x 0.93''
Weight
4.80 oz/136 g (including battery)
Battery Type
Powered by an included 3400mAh battery and compatible with two CR123A batteries.

Product Features

  • 1400 lumens maximum output and 344 meters maximum beam distance.
  • Uses one Luminus SFT40 LED with a life span of 50,000 hours.
  • A single silent multi-function tail switch controls the on/off function ,strobe mode,and four brightness levels.
  • Hidden USB Type-C charging port.
  • Reverse polarity protection, to protect from improper battery insertion.
  • Anti-roll and anti-slip body design.
  • Included body clip for different lighting demands.
  • Made of durable A6061-T6 aluminum.
  • Premium type HAIII hard-anodized anti-abrasive finish.


TECHNICAL PARAMETER

FREQUENTLY Q&A

FAQs About Fenix PD32R Flashlight

    Q1. What is the product positioning of PD32R? What are the key features of PD32R?
    A: Fenix PD32R is a high-performance rechargeable tactical flashlight. Its key features include:
    1.The silent tail switch minimizes operational noise, which assists lighting needs required in various scenarios such as tactical operations and outdoor searching.
    2.The multi-function tail switch controls the on/off, instant strobe, and four brightness levels. 
    3. The hidden Type-C charging port supports USB Type-C charging while maintaining the overall beauty of the flashlight.

    Q2. What kind of LED is used in PD32R? Does Fenix offer to replace LED? 
    A: A Luminus SFT40 LED with a lifespan of 50,000 hours. Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.

    Q3. What is the color temperature of PD32R?
    A: Around 6500K.

    Q4. What is the operating voltage and the operating current of PD32R?
    A: The operating voltage is 2.9 - 6.0 V. The max operating current is 5.2 A.

    Q5. How to prevent accidentally activate the PD32R?
    A: Loosen the light tail, or remove the battery to prevent accidental activation.

    Q6. Is PD32R rechargeable? How long is the charging time? 
    A: Yes. Loosen the light neck to reveal the USB Type-C charging port and battery level indicator. The indicator will display red while charging and will turn green when fully charged. The normal charging time is approximately 3 hours from depleted to fully charged with a 5 V/2 A charging adapter.

    Q7. Why does the PD32R downshift to a lower mode after being used for a while and the higher mode cannot be selected?
    A: There are two reasons: 
    1. Intelligent Overheat Protection
    The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. 

    2. Low-voltage Warning
    When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the Low mode is reached. 

    Q8. Why does the PD32R happen to flicker?
    A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
    1. Poor battery level.
    Solution: Recharge or replace the battery.
    2. The contact or contact point of the battery or flashlight is dirty.  
    Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

    If the above methods don't work, please contact your authorized distributor.

    Q9. What kind of battery can be used in PD32R?
    A: It is recommended to use a Fenix ARB-L18-3400 battery, or two CR123A batteries. While using two CR123A batteries, the actual max output is 800 lumens, the max beam distance is 270 meters and the max runtime is 30 hours at Low output. Other Li-ion batteries are not recommended. As an unmatched battery may cause the flashlight to fail to work normally.




    Q10. What are the optional accessories for PD32R?
    A: 
    AER-02 V2.0 Tactical remote pressure switch, ALG-00 Rail mount, ALG-15 Rail mount, ALG-16 M-LOK quick-release rail mount, ALG-18 Rail mount, AOD-S V2.0 Diffuser tip, AOT-03 Traffic wand, AOT-S+ Traffic wand, AOF-S+V2.0 Filter adapter, etc.


    Q11. What should I do when the PD32R needs repair?
    A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
    2. 5-year free repair: Fenix will repair a light free of charge within 5 years (rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
    3. Lifetime limited warranty: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
    4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.

    For more detailed information, please check:
    http://www.fenixlight.com
    http://www.fenixlight.com.cn

DOWNLOAD CENTER

Fenix PD32R Multilingual User Manual

PRODUCT REVIEWS

CUSTOMER REVIEWS