The Fenix HM62-T is a lightweight headlamp designed specifically for trail runners. It provides a bright beam of light of up to 1200 lumens that can reach a distance of nearly 150 meters. This versatile lamp is built with a red and white LED light source and a red flashing mode for alerting. The operation offers extra convenience with a single side switch controlling all functions. The package comes with a 3400mAh rechargeable battery that can be charged through its built-in USB Type-C port. The headband is perforated and two-way adjustable, allowing users to adjust it with one hand while on the run. With IP68-rated splash-proof and dust-proof ratings and 2 meters of impact resistance, it will make a fantastic headlamp for anyone who takes part in trekking, mountaineering, trail running, or other outdoor activities.

SIZE: 3.22'' × 1.1'' × 1.02''/81.8 × 30.2 × 26 mm.

WEIGHT: 4.41 oz/125 g (including battery).

Product Features

  • 1200 lumens maximum output and 150 meters maximum beam distance.
  • Fitted with one Luminus SST40 white light LED and two 2835 red light LEDs; with a life span of 50,000 hours each.
  • White and red light sources assist various lighting needs in different outdoor scenarios.
  • Quality magnesium alloy material manufactured lamp body, lightweight and durable.
  • Included is one rechargeable 3400mAh battery that has a built-in USB Type-C charging port.
  • Simple operation with a large side switch.
  • Single-handed operation with the 26 mm width two-way adjustable headband.
  • An emergency whistle is attached to the headband to ensure users' safety.
  • Electronic lockout avoids accidental activation.
  • IP68-rated protection and 2 meters impact resistance.



    Q1. What is the product positioning of HM62-T? What are the key features of HM62-T?

    A: Fenix HM62-T is an ultra-lightweight magnesium trail running headlamp. Its key features include:

    1. 1200 lumens max output; 150 meters max beam distance; 23.7 hours runtime mode for trail running.

    2. Neutral white light, Penetrating warm white spotlight, all weather applicable.

    3. Lightweight magnesium material.

    4. Two-way adjustable headband with an emergency whistle.


    Q2. What kind of LEDs are used in HM62-T? Does Fenix offer to replace LED?

    A: Fitted with one Luminus SST40 white light LED and two 2835 red light LEDs; with a lifespan of 50,000 hours each.


    Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.


    Q3. What is the color temperature of HM62-T?

    A: The color temperature is 4500-5000K.


    Q4. What is the operating voltage of HM62-T?

    A: The operating voltage is 2.85V-7.4V.


    Q5. Is HM62-T rechargeable? How long is the charging time?

    A: The included 3400mAh is rechargeable. Charge the battery by inserting the USB Type-C end of the charging cable into the battery's charging port. Charging the included Fenix ARB-L18-3400U V2.0 using the 5V/2A charging adapter takes approximately 3 hours from drain to full.


    Q6. How to prevent accidentally activate the HM62-T?

    Lock: with the lamp switched off, press and hold the switch for 3 seconds, the lamp will blink 4 times on the Low output of white light mode to indicate locked status. 

    Unlock: with the lamp locked, press and hold the switch for 3 seconds, the lamp will be activated on the Low output of white light mode.

    In locked status, clicking or pressing the switches will activate 4 blinks on the Low output of white light mode to indicate locked status.


    Q7. Why does the HM62-T downshift to a lower mode after being used for a while and the higher mode cannot be selected?

    A: There are two reasons:

    1. Intelligent Overheat Protection

    The lamp will accumulate a lot of heat when used at relatively high output levels for extended periods. When the lamp reaches a temperature of 50°C or above, the lamp will automatically step down a few lumens to reduce the temperature.

    2. Low-voltage Warning

    When the voltage level drops below the preset level, the headlamp is programmed to downshift to a lower brightness level until Eco output is reached.


    Q8. Why does the HM62-T happen to flicker?

    A: The reasons that may cause the lamp to flicker, shine intermittently or even fail to illuminate:

    A: Poor battery level.

    Solution: Charging the battery or replace the battery (Ensure battery is inserted according to the manufacturer’s specifications).

    B: The contact point or contact of the battery or headlamp is dirty.

    Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

    If the above methods don't work, please contact the distributor.


    Q9. What kind of battery can be used in HM62-T?

    A: Fenix ARB-L18-3400U V2.0 battery is recommended. Compatible with 2 x CR123A batteries. Other Li-ion batteries are not recommended. As High output fail to headlamp up due to current and voltage limitation, an unmatched battery may cause the headlamp to fail to work normally.


    Q10. What are the optional accessories for HM62-T?

    A: The included headband.


    Q11. What should I do when the HM62-T needs repair?

    A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.

    2. 5-year free repair: Fenix will repair a light free of charge within 5 years (rechargeable battery: 1 year) of purchase if problems develop with normal use.

    3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.

    4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.