5.28'' x 1.00'' x 0.90''
2.95 oz / 83.5 g (excluding battery)
Included a 18650 rechargeable Li-ion battery
（with Micro USB port）
Q1. What kind of LED is used in PD35 V3.0? Does Fenix offer to replace LED?
A: Luminus SFT40 LED with a lifespan of 50,000 hours.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
Q2. What is the color temperature of PD35 V3.0?
A: around 6000K.
Q3. What is the working voltage of PD35 V3.0?
A: Voltage: 3.0V - 6.8V.
Q4. Is PD35 V3.0 rechargeable? How long is the charging time?
A: PD35 V3.0 can't be directly charged, while the included 18650 battery features a micro USB charging port: the anode side displays red when charging and turns blue when charging is completed. The charging time is 3.5 hours.
Q5. How to prevent accidentally activate the PD35 V3.0?
A: Unscrew the tail cap or remove the battery to prevent accidental activation during storage or transportation.
Q6. Why does the PD35 V3.0 downshift to a lower mode after being used for a while and the higher mode cannot be selected?
A: There are two reasons:
1. Intelligent Overheat Protection
The light will accumulate a lot of heat when used at relatively high modes for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user to reselect the modes.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until Eco output is reached. When this happens in Eco output, the battery level indicator blinks red 3 times every 10 minutes to remind you to recharge or replace the battery.
Q7. Why does the PD35 V3.0 happen to flicker?
A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
Q8. What kind of battery can be used in PD35 V3.0?
A: Fenix ARB-L18-2600U and Fenix ARB-L18-3400U are recomended. Compatible with 2 x CR123A Lithium batteries.
Do not mix batteries of different brands, sizes, capacities or types. Doing so may cause damage to the flashlight or the batteries being used.
Q9. What are the optional accessories for PD35 V3.0?
A: ALG-00&ALG-15&ALG-18 Rail Mount
AOD-S&AOD-S V2.0 Diffuser Tip
AOT-S&AOT-S+ Traffic Wand
AB02&ALP-10S Flashlight Holster
AER-02 V2.0 Remote Pressure Switch
Q10. What should I do when the PD35 V3.0 needs repair?
A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 5-year free repair: Fenix will repair a light free of charge within 5 years (non-detachable light: 2 years, rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.
For more detailed information, please check: