The Fenix C5 Pro is a high-output flashlight engineered for rigorous industrial operations. At its core is a Luminus SFT40 Gen2 LED, delivering a maximum output of 2000 lumens and projecting its beam up to 480 meters. It is powered by an included 3300mAh 18650 rechargeable battery and features convenient USB-C charging, allowing you to charge it on the go. The magnetic base ensures easy attachment to metal surfaces for hands-free use. Thanks to its upgraded, thicker body, the flashlight offers exceptional durability and impact resistance, easily enduring everyday bumps and knocks. Whether you're on an industrial site, conducting factory patrols, or handling household tasks, the Fenix C5 Pro is the optimal and trustworthy choice for any user.
| Size | 5.41'' x 1.34'' x 1.00''/137.4 × 34 × 25.4 mm. |
| Weight | 6.65 oz/188.5 g(including battery). |
| Battery Type | ARB-L18-3300 |
HIGH-PERFORMANCE OUTDOOR FLASHLIGHT
A: Fenix C5 Pro is a high-output work flashlight. Its key features include:
A: Utilizes one Luminus SFT40 Gen2 LED, with a lifespan of 50,000 hours each.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
A: Around 6500K.
A: 2.8 - 8.4 V.
A: Yes. The C5 Pro is rechargeable via its USB Type-C charging port. The batter level indicator will display red while charging and will turn green when fully charged. The normal charging time of the included battery is about 2.5 hours from depleted to fully charged.
A: There are two reasons:
1. Intelligent Overheat Protection
The flashlight will accumulate a lot of heat when used at high output for extended periods. When the flashlight reaches a temperature of 60°C/140°F or above, it will automatically and gradually step down its output level to reduce the temperature.
2. Low-voltage Warning
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached.
A: The reasons that may cause the flashlight to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
A: The C5 Pro comes with a lanyard and a holster. Other compatible accessories: AOT-03 traffic wand, AOT-M traffic wand, AOD-M diffuser tip, ALP-10L flashlight holster, ALB-10 quick-release bike mount, ALD-05 helmet flashlight holder.
