TK28R

MULTI-BEAM HIGH-PERFORMANCE FLASHLIGHT

Delivering an impressive 6500 lumens of output and a max beam distance of 400 meters, the Fenix TK28R is a robust and dependable flashlight designed for law enforcement and demanding duty environments. Built for ease and reliability, it features a toggle switch for seamless mode switching among White light mode, Lockout/off mode, and Red light mode, along with dual tail switches for Instant Strobe, Instant Turbo, or other functions when needed. Its break-action mechanism allows for fast battery replacement. The two included 4000mAh batteries provide an astonishing runtime of up to 102 hours in Eco mode. With IP68 rated protection and 1-meter impact resistance, this flashlight is perfect for law enforcement, tactical operations, SAR missions, or outdoor adventures.

  • 6500 LM Lumens
  • 400 M Range
  • 102 H Run Time
  • IP68 Water Resistant
Size 5.82'' × 2.01'' × 1.25''/147.83 × 51 × 32 mm.
Weight 12.64 oz/358.3 g(including battery).
Battery Type ARB-L18-4000*2
 

FEATURES

  • High lumen, long range   6500 lumens maximum output, 400 meters maximum beam distance.
  • Compatible with both spotlight and floodlight   Main light utilizes a Luminus SFT70 LED and a Luminus SST70 LED for spotlight and floodlight. Red light source utilizes two OSRAM GR QSSPA1.23 red LEDs.
  • Break-action batteryBreak-action battery loader allows for fast battery replacement.Powered by two included Fenix ARB-L18-4000 batteries.
  • Dual tail switchDual tail switch for Instant Turbo, Instant Strobe, Instant Red flash and other functions; tail toggle switch for seamless mode switching.
  • Battery level indication.Included stainless steel titanium-plated body clip for secure attachment on pockets or tactical gears.
  • USB Type-C port USB Type-C charging port features a sliding port cover to protect against dust and water ingress.

 

Take a Closer Look

MULTI-BEAM HIGH-PERFORMANCE FLASHLIGHT

FAQS

Contact Us
Q1. What is the product positioning of TK28R? What are the key features of TK28R?

A: Fenix TK28R is a MULTI-LED HIGH-PERFORMANCE FLASHLIGHT. Its key features include:

1、6500 lumens maximum output, 400 meters maximum beam distance.

2、Electronic dual switch + mode selection dial design,Dual tail switch for Instant Turbo, Instant Strobe, Instant Red flash.

3、Sliding Type C charging port;Break-action battery loader allows for fast battery replacement.

4、IP68 waterproof body + waterproof inner charging port

Q2.What kind of LEDsare used in TK28R? Does Fenix offer to replace LED?

A: Main light utilizes a Luminus SFT70 LED and a Luminus SST70 LED for spotlight and floodlight. Red light source utilizes two OSRAM GR QSSPA1.23 red LEDs.The flashlight's luminous angle is greater than 70°.

Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.

Q3. What is the color temperature of TK28R?

A: Around 6500K-7000K.

Q4. What is the working voltage of TK28R?

A: 6.0V-8.4V. 

Q5. Is TK28R rechargeable? How long is the charging time?

A: Yes, the TK28R is rechargeable with its USB Type-C charging port. The normal charging time is approximately 1.5 hours from depleted to fully charged with a 9V/3A charging adapter.

Q6. How to prevent accidentally activate the TK28R?

A:

Solution 1: Turn off the flashlight and remove the batteries.

Solution 2: Turn the toggle switch to the Lockout mode to lock the flashlight.

Q7. Why does the TK28R downshift to a lower mode after being used for a while and the higher mode cannot be selected?

A: There are two reasons:

1. Intelligent Overheat Protection

The flashlight will accumulate a lot of heat when used at high output levels for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature.

2. Low-voltage Warning

When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached.

Q8. Why does the TK28R happen to flicker?

A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:

1. Poor battery level.

Solution: Recharge or replace the batteries.

2. The contact or contact point of the batteries or flashlight is dirty.  

Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.

If the above methods don't work, please contact your authorized distributor.

Q9. What kind of batteries can be used in TK28R?

A: It is recommended to use two Fenix ARB-L18-4000 batteries. In addition, it is recommended to use Fenix-L18-3400/Fenix-L18-3500 series batteries. Do not use 21700 or 16340 batteries. As unmatched batteries may cause the flashlight to fail to work normally.

Q10.What should I do when the TK28R needs repair?

A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.

2. 5-year free repair: Fenix will repair a light free of charge within 5 years (rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.

3. Lifetime limited warranty: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.

4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.

For more detailed information, please check:

http://www.fenixlight.com

http://www.fenixlight.com.cn

Downloads