Built for tough industrial tasks, the Fenix WT26RM is a portable work light featuring high-CRI LEDs for near-perfect color accuracy. Powered by an included ARB-L21-5000 V2.0 battery, it delivers a max output of 2500 lumens and runs for nearly 70 hours in Low output. Its bi-color injection molded body ensures a perfect balance of durability and premium texture. For intuitive control, a rotary switch handles mode switching while an electronic switch enables output selection. With its 360° rotating magnetic mount, this versatile light attaches to metal surfaces securely and adjusts to any angle, adapting flawlessly to diverse worksite demands.
| Size | 4.80'' × 2.20'' × 1.57''/122 × 56 × 40 mm |
| Weight | 8.50 oz/241 g (including battery and headband). |
| Battery Type | ARB-L21-5000 V2.0 |
A: Equipped with one SFT42R LED (50,000-hour lifespan) for spotlight, and one XP-L2 LED with high CRI (≥90) for floodlight.
Fenix does not provide LED replacement services for the time being, and users are not recommended to replace the LEDs independently, which may affect product performance and cause product damage.
A: Spotlight: 6500K. Floodlight: 5000K.
A: Operating voltage range: 3.0V-4.2V; limiting voltage range: 2.8V～
4.2V.
A: Yes, the WT26RM is rechargeable. The charging time is about 3.5 hours.
A: Rotate the rotary switch to Lockout mode to turn off and lock the flashlight. Loosen the battery cover a few turns to prevent accidental activation.
A: There are two reasons:
1. Intelligent Overheat Protection
The light will accumulate a lot of heat when used at a relatively high mode for extended periods. When the light reaches a temperature of 60°C or above, the light will automatically step down a few lumens to reduce the temperature. When the temperature drops below 60°C, it will then allow the user for the reselection of the mode.
2. Low-voltage Downshift
When the voltage level drops below the preset level, the flashlight is programmed to downshift to a lower brightness level until the lowest output is reached.
A: The reasons that may cause the light to flicker, shine intermittently or even fail to illuminate:
1. Poor battery level.
Solution: Recharge or replace the battery.
2. The contact or contact point of the battery or flashlight is dirty.
Solution: Clean the contact points with a cotton swab soaked in rubbing alcohol.
If the above methods don't work, please contact your authorized distributor.
A: It is recommended to use a Fenix ARB-L21 series battery.
A: Yes. The WT26RM’s port features an inner waterproof design. However, users are advised to securely close the anti-dust cover when using the flashlight.
A: 1. 15-day replacement: Fenix will replace identical or equal products with documented manufacturing defects within 15 days of purchase.
2. 5-year free repair: Fenix will repair a light free of charge within 5 years (non-detachable light: 2 years, rechargeable battery and other accessories: 1 year) of purchase if problems develop with normal use.
3. Lifetime maintenance: If repair is required after 5 years from the date of purchase, Fenix will charge for parts. The total repair fee is dictated by the cost of the replaced materials.
4. Warranty certificate: Please keep the warranty card in contacting the authorized distributors for after-sale maintenance, Fenix will provide service support to the distributors.
